KwikChoose Limited
38 Melton St
Earl Shilton
Leics. LE9 7FP

Tel: 01455 846814
Fax: 01455 847495
Mobile: 07946 439638



Nyloil

  • Coefficients of friction, typically half that of other lubricated nylons.
  • A stable, oil impregnated structure with high resistance to water absorption.
  • Hardness, durability and creep resistance comparable with conventional nylons.
  • Free cutting properties, for tighter machining tolerances and smoother finish.

Nyloil Picture

 NYLOIL OIL FILLED NYLON
Nyloil has been specifically developed to combine a low coefficient of friction with the stability and durability of conventional nylons. This has been achieved through a unique manufacturing process, which permanently bonds a lubricating oil into the material structure.
Compared with natural and MOS2 filled nylons, Nyloil can withstand high speeds and unit loadings and bearing life can be increased significantly. With its free machining properties and resistance to creep Nyloil could be the economic solution to your bearing problems.

NYLOIL SUPPLY
Nyloil is available in rod, sheet and tube in a range of standard sizes.
Rod - 13mm dia. to 2S0mm dia. in 1 metre lengths.
Sheet - 10mm thick to 80mm thick in 1200mm x 600mm and 1 OOOmm x SOOmm.
Tube - 50mm OD x 30mm ID to 2S0mm OD x 200mm ID.
Custom castings and non standard sizes can also be supplied.
Property
Units
Test Method

Value
Specific Gravity

g/cm3
D792
1.14
Water Absorbtion

24 Hours immersion at 23°C
%
D570
0.2/0.5

Saturated 23°C
%
D570
2.5/3.0

Hardness

Rockwell R
D785
110

Shore D
79 to 82
Melt POint
°C
D2117
220
Max service temp. Air Continuous
°C
100
Max service temp. Air-Short term
°C
125`
Min service temp. Air
°C
-40
Notched Impact stregth
Kj/m2
ISO 180 1A
6.5
Impact strength at RT
Kj/m2
ISO 180 1C
no break
Impact strength at -30°C`
kj/m2
ISO 180 1C
70.02
Tensile strength
N/mm2
DIN 53455
76.4
Tensile strength at break
%
DIN 53455
66.1
Elongation at break
N/mm2
DIN 53455
34.3
Modulus of elastcity
N/mm2
DIN 53457
3790
Max. flexural strength
N/mm2
DIN 53452
108
Flexural Modulus
N/mm2
DIN 53457
2979
Information given in good faith, but without warranty.